Product4-manufacture,factory,supplier from China

What is OSB ?Oriented Strand Board (OSB) is a kind of fresh wood with large diameter and straight trunk as raw material. It is processed along the direction of wood grain by special slicing processing equipment.

An Introduction to OSB Board      OSB is Oriented Strand Board ,the upgrading of traditional particle board.

Characteristics of OSB1. Wide sources of raw materials and low prices.The raw materials of directional particle board are mainly small diameter wood of soft coniferous wood and broad-leaf wood, fast-growing thinning forest, such as eucalyptus, Chinese fir, poplar thinning wood, etc., with a wide range of sources.2. High output rateCompared with other types of wood-based boards, oriented particle board has a higher output rate.

What is OSB Board?       Oriented strand board (OSB) is a type of engineered wood similar to particle board, formed by adding adhesives and then compressing layers of real wood strands (flakes) in specific orientations.

    Oriented strand board (OSB), also known as Ozon board, originated in the 1970s and developed from structural particle board-waffle board. Since the mid-1980s, it has developed rapidly in North America and Europe, and has begun to replace plywood in large quantities. For use with fiberboard.    Oriented strand board is a new type of high-strength environmental protection board.

App Features:Because of the three-layer criss-cross structure, Ozon board is more uniform than ordinary particle board, has better toughness, strong nail holding power, and is not easy to swell when it is damp. It is used as a house structure abroad and is strong. But it is relatively thick, the surface is uneven and difficult to handle, and it is rarely made into furniture.  When Ozon board came to China, it has almost become an upgraded substitute of large core board, with good quality and high price. It is especially suitable for the base layer of the background wall.

Advantages of MDFThe surface is smooth and flat, the edges are firm, the surface decoration is good, and it is easy to finish and process. All kinds of paints and paints can be evenly slaughtered on MDF boards. Various veneers, adhesive tape films, light metal sheets, and melamine boards can be pasted on the surface. , good physical properties, no dehydration problem.

1. The internal structure of MDF is very well-proportioned. Although it is a kind of density board, its density is moderate, and it has strong stability and is not easy to deform and alias. At the same time, its physical and mechanical properties are very good.2. The surface of the board is very smooth and has good processing performance. There is no need to worry about lace and other issues when cutting. If you want to pursue beauty, you can also paste sliced veneer, pattern and unique and beautiful decorative paper, so it is suitable for house decoration.

Decoration Particle Board Introduction:Particle board is made of wood or other lignocellulosic materials, applied adhesive and then glued together under the action of heat and pressure, also known as shredded board. It is mainly used in furniture manufacturing, construction industry and train and carriage manufacturing.Decoration Particle Board Advantages:A. Good sound absorption, sound insulation and thermal insulation properties;B. The internal granular crossed and staggered structure, the performance of each direction is basically the same, and the lateral bearing capacity is good;C.

    For furniture manufacturing, the most common and most widely used in the market is mainly MDF, with a density of 680~830KG/M3. It is widely used in the manufacture of cabinets, beds, wooden doors, tables and chairs, showcases and other furniture, as well as wooden items such as gift boxes, photo frames, stereos, props, etc. It is also a common board for interior decoration, basically most of the furniture around you Products have the material composition of density board.The surface of products with a thickness of 6mm or less can also be divided into matte and sanding effects.

The raw materials for making particleboard include wood or wood fiber materials, adhesives and additives. The former accounts for more than 90% of the dry weight of the board. The wood raw materials are mostly taken from felled wood in the forest area, small diameter wood (usually less than 8 cm in diameter), felling residues and wood processing residues. Wood chips, shavings, wood filaments, sawdust, etc. processed into flakes, strips, needles and granules are called chips.

Particle Board Details.Size1220*2440mmThickness12mmCertificationFSC, CE, ISOMOQ20 CbmDensity600-700 Kg/CbmGlueWBP Mdi Phenolic E0 E1 E2Moisture6-8%Thickness Tolerance+-0.2mmSize Tolerance+-2mmTransport Packageby Standard Exporting PalletsSpecification1220*2440OriginChinaHS Code44101200Production Capacity30000 Cbm Monthly

   The production of chipboard in China has gone through a repeated process from the rise in the 1980s to the decline in the 1990s and then to the rise again in 2000. After the particle board was abandoned by the market due to poor quality and other reasons, many particle board enterprises learned a lesson, introduced advanced production lines from abroad and improved the technology level.    After that, the quality of particle board in China has improved significantly, and it has been accepted by the market again.

     Our most vital products include: Particle board, OSB, MDF, HDF,Finished MDF, with many superior imported equipments and manufacturing traces, truly offering capability not less than 30,000 cubic meters monthly.     All production properly adapt to The United States, India, Middle-east, South Asia, Europe, Middle & South America, many nations and areas, well used and in shape for furnishings, decorations and production industries.     We constantly insist on "High-quality first, Service-first" making standard products and comu

     Particleboard is also called particle board or particle board. It is a kind of wood-based panel made of wood or other lignocellulosic materials and glued under heat and pressure after applying adhesive. It is also called particle board.

Advantages and disadvantages of density FiberboardAdvantages:      1. The MDF surface is flat and easy to paint. All kinds of paints and paints can be evenly coated on the density board, which is the first choice for paint effect.      2. Density board is another kind of beautiful decorative board, which is better than solid wood furniture in appearance.      3. All kinds of veneer, printed paper, PVC, gummed paper film, melamine impregnated paper and light metal sheet can be decorated on the surface of MDF.      4.

MDF Products on show Products detailsProduct:MDFMaterial:Polar Pine Combi HardwoodGlue:MDI WBP Phenolic E0 E1 E2Size:1220*2440 1250*2500 mm or accept customizationThickness:6-45mm or accept customizationMOQ:20 CBMDelivery time:15 daysThickness tolerance:+-0.2mmSize Tolerance:+-2mmUsageRoof decking, furniture,packing,hoarding,signboards, portable building, constructional insolation boardQuestions about MDF products.Q 1.

The differences between flame-retardant MDF and ordinary MDF are analyzed one by one as follows: 1. Color The color of flame-retardant MDF is dyed with red dye, so red MDF is not necessarily flame-retardant MDF Board, this point cannot be identified. 2. Physical and mechanical properties Due to the addition of flame retardants, the water-absorbing expansion of the board is affected to a certain extent. Therefore, testing the water-absorbing expansion coefficient of the board can preliminarily judge whether the flame-retardant MDF can meet the use requirements.

     Particleboard is also called chipboard or flake board. it's a form of timber-primarily based panel fabricated from wood or different lignocellulosic materials and glued beneath warmth and strain after applying adhesive. it is also called particle board. it is specially used in fixtures production and construction enterprise, in addition to train and car carriage production.Advantage of  Particle Board A. suitable sound absorption, sound insulation and heat insulation performance;B.

The difference between flame-retardant MDF and ordinary MDF Appearance difference: Flame-retardant MDF is a kind of functional MDF. From the appearance, it is red, mainly because the fiber is dyed with red dye according to the international customary calendar, so as to distinguish it from ordinary MDF. Physical and mechanical properties Flame-retardant MDF is also MDF. First of all, it must have the physical mechanics of ordinary MDF to meet the use requirements.

What are the common wood products in life that are MDF?    The common one may be the table. Some people think that the table should be made of solid wood, but in fact, many tables are made of density board, and then the surface is veneered to make the surface resistant to dirt and wear, and not easy to change color.

MDF product advantages and development prospects    The surface of MDF is smooth and not easily deformed, the performance is stable, and the edges are relatively strong and firm; the thermal insulation performance is good, and the tensile strength is high. These characteristics are more suitable for furniture manufacturing and interior decoration of construction projects.

How to choose good quality MDF?1.Surface cleanliness: There should be no obvious particles on the surface of the density board with good surface cleanliness. Particles are caused by impurities brought in during the pressing process, which not only affects the appearance, but also makes the paint film easy to peel off.2.Surface smoothness: When touching the surface with hands, it should feel smooth. If it feels astringent, it means that the processing is not in place.3.Surface smoothness: The surface of the density board should be bright and smooth.

What details should be paid attention to when density board is veneered?        1. Moderate pressure: generally 2~3MPa, if it is too low, it will affect the bonding strength between the base material and impregnated paper, and if it is too high, it will damage the board.        2. Hot pressing time: it depends on the curing speed of the impregnated resin and the hot pressing temperature, generally 40-50s is appropriate. If the time is too long, the resin will be over-cured, lose its proper elasticity, and cause cracks in the subsequent processing.